Yellowtec VIPdigital Getting started 3
VIPdigital 22.06.2004 Getting Started
First audio connections
If you not only wish to view, but also wish to listen for a test how the presets are working, please apply
an analog signal with studio line level (CD/MD player, mixer output etc., preferably speech) to Analog
Input 1.
In first line, VIPdigital is a processor for microphone signals. However, the default internal presets
have been configured with a gain-setting of 0dB for reasons of safety to avoid feedback and
unintentional loud levels during the first setup. In addition, the phantom power is deactivated in the
default presets. Of course, you can adapt the gain-setting to your individual needs later at any time,
using the VIPremote Windows
®
software.
The following is the recommended procedure for a demonstration setup. Connect an analog line
source to the XLR Analog Input 1 on the back panel of the unit. Connect the Analog Left Out/Right Out
analog outputs to the line inputs of a mixer or a monitor unit.
Note that the audio level of your test signal is relevant. The settings of some audio modules e.g.
compressor and expander are related to the input level. You can check the input level tendency on the
upper LED-segment level indicator on the frontpanel of the unit.
Recall the first 3 internal presets by operating alternately the Preset Recall buttons.
Refer to the manual ...
... to become acquainted to the whole functional range of VIPdigital.
Find out, how to access all of the 100 internal preset memories of VIPdigital and how to work “online”
with your PC running VIPcon and VIPremote Windows
®
Software, and …
On the supplied CD-ROM there is an interactive manual in the pdf-format, which is also suited
for print-out. During software installation it is copied automatically to the VIPdigital program
folder. The file name is VIPd_manual.pdf .
(You need Adobe Acrobat Reader 5.0 or higher, supplied with the CD-ROM)
Software Installation
To use the whole functionality of VIPdigital, you will need a PC with Windows 95 or higher, a CD-ROM
drive and a free serial port (RS232).
Connect the PC serial port to one of the RS232 ports of your VIPdigital. Place the CD-ROM in the
drive and start the installation routine (SETUP.EXE). The user-friendly software guides you through
what you need to do. No need to worry – the set-up software will be copied onto your PC without
changing any settings on your computer!
Read all installation instructions carefully.
Note:
VIPcon software has password protection. The default password is dvp
You can find a detailed description of all functions in the manual.
Please read the manual before using VIPdigital.
Any questions? Please get in touch with your dealer or contact us by e-mail on
support@yellowtec.com
The YELLOWTEC team wishes you great enjoyment with your VIPdigital !
(69 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern